Installation And Removal; Front Bezel; Figure 8-1: Key Of The Front Bezel; Figure 8-2: Inserting The Front Bezel (1) - NEC Storage M100 Series User Manual

User Guide

8.3 Installation and Removal

Perform the following procedures to install or remove the concerned optional part of a disk array unit:

8.3.1 Front Bezel

Inserting a front bezel
The procedure for inserting a front bezel is as follows:
1. To install a front bezel, first unlock it by turning the key to the horizontal position.
2. Catch the left side of the front bezel on the hook of the unit.
Release 6.0

Figure 8-1: Key of the Front Bezel

Figure 8-2: Inserting the Front Bezel (1)

251
Chapter 8 Installing Optional Parts