Yamaha RX-V779 Owner's Manual page 84

■
Operating the unit from Zone2 (remote connection)
You can operate the unit or external devices from Zone2 using the remote control
supplied with each device if you connect an infrared signal receiver/emitter to the unit's
REMOTE IN/OUT jacks.
• (RX-V779 [China, Korea, U.K. and Europe models] only)
You can operate external devices with the supplied remote control if you register a remote control code for
each device. For details, refer to "Supplement for Remote Control" on the supplied CD-ROM.
REMOTE IN/OUT jacks
TRIGGER OUT IN
12V 0.1A
HDMI 1 HDMI 2
HDMI OUT HDCP2.2 HDCP2.2
HDCP2.2
IN OUT
2 1
(BD/DVD)
ARC
OUT
REMOTE
REMOTE
ANTENNA
OPTICAL VIDEO
(RADIO)
FM AM
(TV)
AV4
COAXIAL
AV3
P Y P P
Y P B R B R
AV2
MO
OPTICAL
AV 1
COMPONENT VIDEO VIDEO
ZONE 2
AUDIO 1 AUDIO 2 AV 5 AV 6 ZONE OUT
The unit (rear)
Infrared signal
transmitter
External device
(such as a CD player)
Main zone
Infrared signal
receiver
Remote control
(supplied with each device)
Zone2
Remote connections between Yamaha products
An infrared signal transmitter is not required if you are using Yamaha products that
support remote connections, as the unit does. You can transmit remote control signals
by connecting the REMOTE IN/OUT jacks with monaural mini-jack cables and an
infrared signal receiver.
REMOTE IN/OUT jacks
Infrared signal
receiver
Remote control
Zone2
84
En
REMOTE IN/OUT jacks
IN IN
OUT OUT
REMOTE REMOTE
Yamaha products
(up to six, including the unit)