Playing Macros - Bosch AMAX panel 2100 User Manual

AMAX panel
8.2

Playing Macros

How to Play a Macro
There are two methods to play a macro.
Method 1:
4
P
Method 2 (Quick Play):
4
P
Please contact your installer to enable/disable this function.
Notice!
Please note that the play function has to be enabled/disabled
individually for every user. Please refer to Add/Change User
Codes, page 32.
Example of Playing a Macro: Bypassing a Zone
This example shows how to play macro 1 for bypassing zone 3
(see the example in Recording Macros, page 29).
4
P
P
Bosch Sicherheitsysteme GmbH
Enter your code and press the number on which the macro
is assigned for three seconds. (Possible numbers are 1, 2
and 3.)
The system beeps and the operation which is assigned to
the macro is executed automatically.
Press the number on which the macro is assigned for three
seconds. (Possible numbers are 1, 2 and 3.)
The system beeps and the operation which is assigned to
the macro is executed automatically.
Enter your code and press [1] for three seconds.
The system beeps and the macro 1 is executed
automatically.
If zone 3 was unbypassed before playing macro 1, it is
bypassed now.
If zone 3 was bypassed before playing macro 1, it is
unbypassed now.
Macros | en
2015.05 | 04 | F.01U.295.569
31