24
en | System Test
5
System Test
5.1
Siren Test
This function allows the users to test the siren.
4
P
5.2
Communication Test
This function allows the users to send a test report to a central
monitoring station.
1.
2.
5.3
Walk Test Mode
This function allows users to test detection devices to ensure
they are functioning correctly. Bypass any zones that are not
required for testing before activating the walk test mode.
During the walk test, no walk test report is sent out to the
control panel system.
How to Select Walk Test Mode:
1.
2.
P
2015.05 | 04 | F.01U.295.569
Enter your code + [4] [1] and press [#].
The system beeps twice and the siren is activated for one
second.
Enter your code + [4] [2] and press [#].
The system beeps twice and a test report is send.
The keypad displays the status of the test report for all
communication paths.
Press [#] to exit.
Enter your code + [4] [3] and press [#].
The system beeps twice and the STAY and AWAY indicators
flash.
Unseal and seal the zones to be tested.
The system beeps. The siren beeps once each time a zone
status is changed.
Bosch Sicherheitsysteme GmbH
AMAX panel