Static Ip Setup - Samsung SPE-400 User Manual

network connection and setup
Item
URL
IPv4
IPv6
Search
Auto Set
Manual Set
Exit

M
For the IP installer, use only the installer version provided in the installation CD or use the latest
one if available. You can download the latest version from the Samsung web site (www.
samsungcctv.com).

STATIC IP SETUP

Manual Network Setup
Run <IP Installer_v2.XX.exe> to display the network device search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.

M
For network devices found with the IPv6 setting, these buttons will be grayed out as the network
devices do not support this function.
1. Select a network device from the
search result.
Check the MAC address of the device
on the network device's label.
Both the [Auto Set] and [Manual Set]
buttons will be activated.
2. Click [Manual Set].
The Manual Setting dialog appears.
<IP Address>, <Subnet Mask>, <Gateway>, <HTTP Port>, and <VNP Port> of
the network devices are displayed in the preset values.
26_ network connection and setup
DDNS URL address enabling access from the external Internet.
However, this will be replaced with the < IP Address > of the encoder if
DDNS registration has failed.
Scans for network device with the IPv4 setting.
Scans for network device with the IPv6 setting.
Activated in an IPv6 compliant environment.
Scans for network devices that are currently connected to the network.
However, this button will be grayed out if neither IPv4 nor IPv6 is checked.
The IP Installer automatically configures the network settings.
You should configure the network settings manually.
Exits the IP Installer program.
Description