Toshiba D-VR3SU Service Manual page 82

Disassembly and Reassembly
5-4-19 Lever Unit Pinch Ass'y, Plate Joint,
Spring Pinch Drive Removal
1) Lift the Unit Pinch Ass'y Œ.
2) Remove the Plate Joint ´ from Lever Pinch Drive.
3) Remove the Spring Pinch Drive ˇ.
Note :
1) Take extreme care not to touch the grease on the
Roller Pinch.
2) When reinstalling, be sure to apply grease on the
post pinch roller.
ΠLEVER UNIT PINCH ASS`Y
´ PLATE JOINT
ˇ SPRING PINCH DRIVE
Fig. 5-32 Lever Unit Pinch Ass'y, Plate Joint,
Spring Pinch Drive Removal
5-16
5-4-20 Lever #9 Guide Ass'y Removal
1) Remove the Spring #9 Guide Œ.
2) Lift the Spring #9 Guide Ass'y ´ in the direction
of arrow "A".
Note :
1) Take extreme care not to get grease on the tape
Guide Post.
2) After reinstalling, check the bottom side of the Post
#9 Guide to the top side of Main Base.
ΠSPRING #9 GUIDE
Fig. 5-33 Lever #9 Guide Ass'y Removal
A
´ LEVER #9 GUIDE ASS`Y
"B"