When The Power Window Does Not Close Normally - Toyota GT86 Owner's Manual



When the power window does not close normally

If the jam protection function is operating abnormally and a window cannot
be closed, close all the doors and perform the following operations using the
power window switch on the relevant door.
STEP 1
Vehicles without a smart entry & start system: After stopping the
vehicle, the engine switch is turned to the "ON" position.
Vehicles with a smart entry & start system: After stopping the vehi-
cle, the "ENGINE START STOP" switch is turned to IGNITION ON
mode.
STEP 2
Hold the power window switch in the one-touch closing position two
consecutive times.
STEP 3
Hold the power window switch in the one-touch closing position
once again and continue holding for 1 second or more after the win-
dow closes completely.
If you push the power window switch to the opening position while the win-
dow is moving, start again from the beginning. If the window continues to
close but then re-open slightly even after performing the above procedure
correctly, have the vehicle inspected by any authorized Toyota dealer or
repairer, or another duly qualified and equipped professional.
1-4. Opening and closing the windows
1
85