Contmumg Your Connection Steps - Sony 158SVR2000 Setup Manual

Notes
• If you have a VCR that has 5-Vldeo Inputs
and outputs, and your TV also has an
S-Vldeo Input, it's preferable to have the
SVR Recorder send its signal to your VCR
and have your VCR send its signal to your
TV. You won't be able to connect the SVR
Recorder directly to your TV since the SVR
Recorder only has one S-Video Out Jack.
• Even If you've connected through your
VCR, you may want to directly connect the
SVR Recorder to your VCR and TV. For
example, If your VCR doesn't have S-Vldeo
Jacks but your TV has an S-Video Input, you
probably will want to connect the SVR
Recorder directly to your TV to take
advantage of the better picture quality of
S-Video cables. Also, if your TV has
picture-in-picture capabilities, you could
watch a Videotape on your VCR while you're
watching the SVR Recorder.
• If your TV has only one audio Jack Instead of
two, connect Just the white audio cable, and
leave the red audio cable disconnected.
3b IR Output to VCR - Sony VCRs only.
If you own a Sony VCR, you can use the IR Control cable (supplied) to save
programs to a vIdeotape m the VCR usmg the "Save to my VCR function"
(Once connected, refer to your TiVo Viewer's GUIde for mstructIOns on how to
save programs to your VCR.)
• Plug the IR Control cable mto the Cntrl Out IR jack on the back of the SVR
Recorder. If you are usmg a cable or satellite set-top box, you may have
already done thIS.
• Place one IR EmItter (from the IR Control cable) m front of the IR wmdow on
the Sony VCR. You can adhere the IR EmItter usmg ItS adhesIve bottom.
3c Video Output directly to TV.
• If you already did step 3a, thIS step IS optional.
• Look at the back of your TV and the SVR Recorder and see what types of
jacks are available. Connect the SVR Recorder output to your TV mput usmg
the best possible connectIOn from the followmg optIOns:
• S-Video cable, along With the LeftIRight (whIte and red) Audio cable
(best)
• CompOSIte Video (yellow) and LeftIRight Audio cable (whIte and red)
(better)
• RF Output, usmg the black RF CoaXIal cable (good)
• If you are connectmg usmg RF CoaXIal cable, you need to select between
output on channel 3 or 4 usmg the small sWItch next to the RF Out jack on the
back of the SVR Recorder. To get the best picture, select the channel that IS
not occupIed by a local broadcast channel. For example, if there IS a local
broadcast station on channel 4, select channel 3. You will need to tune your
VCR to thIS channel to receIve the SVR Recorder.
-
m e")
.co
C
j
- ' j
"CD
3
n
CD=
::;, ::;,
-to
~
C
'"I
Continumg Your Connection Steps
I
33