introduction
BOTTOM VIEW
➎
Tripod Mounting Bracket Screw Hole
Used to fix the camera on a bracket or tripod.
The screw sizes for this hole are as follows:
* You can separate the Tripod Mounting Bracket and install it
on the top or bottom of the camera. Make sure to use the
Tripod Mounting Bracket when fixing the camera to a bracket
or tripod. Otherwise the camera may not be secure, or the
internal circuitry of the camera may be damaged.
M
Tripod is not supplied with the camera. Please check the installed documentation of tripod for
the installation of cameras.
12_ introduction
Cannot fasten screws here.
When fastening the screw,
make the screw fastening part
head to the camera module.
1/4"-20 UNC (20 THREAD)
L:4.5mm±0.2mm (ISO standard),
or 0.197" (ASA standard)
L