2.6 Optional Recording Paper Tray Block
2.6.1 Optional Recording Paper Tray Block
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1)
Lift the main block to separate it from the optional recording paper tray block.
Alignment pin
(2)
Reassemble the components in the reverse order of disassembly.
NOTE: Place the main block over the optional recording paper tray block with align-
ing the holes on the bottom of the main block with the two alignment pins of
the optional paper tray block.
March 2000 © TOSHIBA TEC
Main block
Alignment pin
Optional recording paper tray block
Fig. 8-2-135
8-107
DP120F/DP125F Removal/Replacement
08-02-135