Chapter 6. DSLT Features
Hardware Requirements
•
N/A
Related Programming
•
FF1: DTMF
•
FF2: DP to DTMF (Outgoing)
•
FF2: DP to DTMF (Incoming)
Considerations
•
N/A
Flash
CPC-96, CPC-288, and CPC-576 All Versions
Description
You can send a flash signal on your telephone to release an outside line and then either automatically
reseize the same outside line or switch to extension dial tone status by pressing the FLASH key.
Trunk programming determines whether your phone reseizes the outside line or switches to extension
dial tone status.
Hardware Requirements
•
N/A
Related Programming
•
FF1-1: Flash Timer
•
FF2: Flash Pattern
•
FF2: Flash Key Operation
•
FF3: Flash on PROG (Recall)
Considerations
•
N/A
Hot Line
CPC-96, CPC-288, and CPC-576 All Versions
Description
Hot Line enables you to immediately connect to another pre-assigned extension or speed dial number
simply by lifting the handset. You do not have to dial any digits.
246
DBS 576 (USA), issued January 1999
Section 700 - Operation
576-20-700