Set Text Message Replies - Panasonic DBS576 Section 700 Technical Manual

Chapter 4. User Maintenance

Set Text Message Replies

Description
This menu item specifies reply text messages.
Operation
To set Text Message Replies using either a large-display or small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 11.
3. Press the HOLD key.
4. Enter 1.
5. Press the HOLD key.
6. Press the HOLD key.
7. Enter the Message number (0-9).
8. Press the HOLD key.
9. Enter the Text Message (up to 15 characters):
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
83.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 84.)
Note: Press the FLASH key to clear any existing data.
10. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-display phone on page 83.
• See Example 2. Small-display phone on page 84.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
11. Repeat steps 9-10 as many times as necessary to enter the
desired Text Message.
Note: Press the FLASH key to clear the entire entry.
12. Press the HOLD key to store the entry.
114
Action
DBS 576 (USA), issued January 1999
Section 700 - Operation
Result
81-
User MAINT displays
8111-
Text Message displays
1 :
Reply Message displays
Enter Msg # displays
A B C D E F X
displays (where X = Reply Text Message
number)
Next message number displays
576-20-700