Synchronizing the throttle valve
1. Loosen the bank synchronizing screw 1.
2. Remove the port link rod 2 and star-
board link rod 3.
3. Loosen the starboard throttle stop screw
4 until it separates from the throttle body
lever 5.
4. Loosen the synchronizing screw 6 of
cylinder #3 to open throttle valve #3.
5. Loosen the synchronizing screw 7 of
cylinder #5 to open throttle valve #5.
69J1D11
6. Loosen the port throttle stop screw 8
until it separates from the throttle body
lever 9.
7. Loosen the synchronizing screw 0 of
cylinder #4 to open throttle valve #4.
8. Loosen the synchronizing screw A of
cylinder #6 to open throttle valve #6.
9. Connect the test harness (3 pins) to the
throttle position sensor.
Throttle control
4-16
1
2
3
4
5
6
7
8
9