Table 2.17 Ports And Leds Of The Mgi - Samsung OfficeServ 7200 General Description Manual

OfficeServ 7200 General Description Guide
The components on the front panel of the MGI have the following functions:
Ports & LEDs
LAN port
SIO port
RST
PWR LED
RUN LED
LAN Tx LED
LAN Rx LED
SVC LED
DSP LED
RTPT LED
RTPR LED
© Samsung Business Communications

Table 2.17 Ports and LEDs of the MGI

Port connecting Ethernet.
UART port (for tests).
Button for resetting the MGI.
This LED indicates the power supply status.
- Off : Power is not being supplied.
- On : Power is being supplied normally.
This LED indicates MCP status.
- Off : Power is not being supplied.
- On : Booting.
- Blink : The RAM program is operating.
This LED indicates the status of Ethernet data transmission.
- Off : Data does not exist.
- On or blink : Data is being transmitted.
This LED indicates the reception status of the link and Ethernet data.
- Off : Data does not exist or the link is not connected.
- On or blink : Data is being received.
This LED indicates if the service is being offered.
- LED blinks when the software task can be serviced.
This LED indicates if the VoIP DSP is operating.
- LED blinks when the VoIP DSP operates.
This LED indicates if the voice packets are being forwarded.
- LED turns on when the voice packets are forwarded.
This LED indicates if the voice packets are being received.
- LED turns on when the voice packets are received.
CHAPTER 2. OfficeServ 7200 Hardware
Function
Page 2-23