Q
What You Need to Operate the Bus Interface Module
Q-6
•
Series 90-30 backplane with CPU module
See Table Q-1 for models that can be used with the LBIM.
•
A PC or laptop that runs Microsoft Windows with either a Serial L
or PC L
T
Adapter (PCLTA)
ON
ALK
This is required to run the network interface configuration software provided with the LBIM.
•
Logicmaster 90 software
See Table Q-1 for versions that can be used with the LBIM.
•
L
W
network binding tool
ON
ORKS
No network binding tool is included with the product. However, many third-party network
management software packages that include network binding tools are available. (See Table
Q-2 for suggestions.)
•
Network interface configuration software: (for Microsoft Windows) IOPEN.EXE
This is provided with the LBIM.
Table Q-1. Compatible CPU Models and Logicmaster 90 Software Versions
CPU Models
IC693CPU___
311S
331T
313H
323H
340B
341K
351AA
351AB
In each case, later models or versions can be used.
Table Q-2. Choosing a Network Binding Tool
Third-party network
management tools
Considerations
Series 90™-30 PLC LONWORKS® Bus Interface Module User's Manual – June 1997
CPU Firmware
release 5.0 or later
release 6.0 or later
release 6.02 or later
•
L
M
from Echelon
ON
AKER
•
ICELAN-G from IEC
•
MetraVision from Metra Corporation
•
others
•
How well it handles nodes that have a large number of NVs
•
Ability to handle Standard Configuration Parameter Types (SCPT)
and load these values using L
T
Adapter (SLTA)
ON
ALK
Logicmaster 90 Software
IC641SWP___
(release 5.0 or later)
301R
306K
311A
(release 6.0 or later)
301S
306L
311A
(release 6.0 or later)
T
File Transfer
ON
ALK
GFK-1322A