Connecting A Programmer - GE 90*-30 PLC Series User Manual

Connecting a Programmer

GFK-1322A
To configure the LBIM, the computer serial communications port must be connected to the
L W network through a L
ON ORKS
on the network. As shown in Figure 3-5, three types of L
External SLTA
PCLTA card
PCMCIA Interface card (PCC-10), available
from Echelon Corporation
22 ( 0 .36m m 2 ) or
24 (0.22 m m 2 )
Tw is ted P air C able
to P C w ith
Lo nTa lk a dap te r
Figure 3-4. Connections for LBIM Configuration
Chapter 3 Hardware Installation
T adapter (Figure 3-4). In effect, the computer is a node
ON ALK
Can be used with all LBIM models.
Can be used with all LBIM models.
Can be used only with PE693BEM350 (free topology)
LBIM.
In all cases, the LONTALK adaptor transceiever
type must match that of the LBIM used.
L W
O N O R K S
Ne tw o rk
N od e
T adapters are available:
ON ALK
Series 90 -3 0 P L C
L
B
I
M
to tw o-pin rem ovable s c rew term ina l
NE TW O R K port o n LB IM
N od e
N od e
3
3-5