ENGINE ASSEMBLY AND ADJUSTMENT
INSTALLING THE AUTOLUBE OIL PUMP
1. Install:
• circlip
• pin
• pump drive gear
• circlip
2. Apply:
• grease with lithium soap base
(on the o-ring
3. Install:
• autolubrication pump
Screw (autolubrication pump)
4 Nm (0.4 m • kg)
4. Apply:
• grease with lithium soap base
(on the autolubrication pump gear
Lithium soap base grease
15 cc (0.92 cu • in)
INSTALLING THE DC-CDI MAGNETO
1. Install:
• gasket
2. Apply:
• grease with lithium soap base
(on the oil seal
3. Pass the wheel cable through the crankca-
se orifice.
4. Install:
• stator assembly
Screw (stator assembly)
8.5 Nm (0.85 m • kg)
5. Install:
• woodruff key
• rotor
• plain washer
• nut
4-25
ENG
)
)
,
)