Table of Contents
Advertisement
Dialing Outside
Numbers
Dialer
VIPedge UG
12/12
Dial same as User Dialed – With this option selected, outside phone numbers
•
will be dialed exactly how the user dialed them (unchanged by Call Manager).
Use Local Dial Plan – When this option is selected, the user dials an outside
•
phone number, the number will be analyzed according the dial plan and the
number will be automatically modified (add "1+" for Long distance, etc) before
Call Manager dials it. Use the Change Plan button to view and/or change the
settings of the dial plan.
Use SERVER Dial Plan – When this option is selected, the dial plan that is
•
configured on the NET Server will be used as the dial plan. You can press the
Check Plan button to bring up the Server Dial Plan Tester screen that allows
you to enter a Test Phone Number and see how it will be dialed. It is the
responsibility of the System Administrator to setup and maintain the server
dial plan.
When the Dialer option is installed, two action buttons can be defined for use with
the Dialer. These user-defined buttons can appear on both the Ready to Dial and
the Results screens used with the Dialer.
Ready to Dial – Enable the Action button and select the Action to be
•
performed when the button is pressed. Optionally, the label can be changed to
meet your needs.
Call Results – Enable the Action button and select the Action to be performed
•
when the button is pressed. Optionally, the label can be changed to meet your
needs.
TOSHIBA
VIPedge
Preferences
89
Advertisement
Table of Contents
