Table of Contents
Advertisement
VIPedge
Using Call Manager Features
78
to dial calls. The following are some of the typical ways to place a call using
Call Manager. Most of these functions are found on the Call Manager Home
tab.
Manual On-screen Dialing
1. Click within the dial number box and enter the number from the keyboard
(shown below).
2. Press Enter when done to start the number to be dialed.
Re-dial a Recently Used Number
1. Pull down the list of numbers in the dial number box and select the
number to dial.
2. Click the Make Call button to dial.
Using Call Manager Dialpad
1. Click the dialpad button
2. Enter the number to be dialed including a trunk access code; the call will
proceed automatically once a valid number is entered.
Hot Key Dialing
1. Highlight a telephone number in another application.
2. Using the keyboard, press the key combination assigned for Hot Key
Dialing. The call will proceed dialing the number highlighted.
Using Drag and Drop
Use the mouse to drag and drop a call from either the Call History or
•
Contacts tab list into the LCD Display window. The call will proceed to
dial.
Using Contacts / Personal Speed Dial List
1. Click the Contacts Companion tab to open the contacts page, and
navigate to a Directory or Group.
2. Make a selection from the listing and double-click the name to proceed
dialing.
or right-click on the selected name and choose Call Now to proceed.
TOSHIBA
Dial Number Box
to expose the dialpad.
VIPedge UG
12/12
Advertisement
Table of Contents
