D-Link DES-1228/ME User Manual page 56

UDP Port (514 or
6000-65535)
Status
To set the System Log Server configuration, click Apply. To delete an entry from the System Log Host window, click the
corresponding under the Delete heading of the entry to delete. To return to the System Log Host window, click the
System Log Servers link.
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
0 kernel messages
1 user-level messages
2 mail system
3 system daemons
4 security/authorization messages
5 messages generated internally by syslog line printer subsystem
7 network news subsystem
8 UUCP subsystem
9 clock daemon
10 security/authorization messages
11 FTP daemon
12 NTP subsystem
13 log audit
14 log alert
15 clock daemon
16 local use 0 (local0)
17 local use 1 (local1)
18 local use 2 (local2)
19 local use 3 (local3)
20 local use 4 (local4)
21 local use 5 (local5)
22 local use 6 (local6)
23 local use 7 (local7)
Type the UDP port number used for sending Syslog messages. The default is 514.
Choose Enabled or Disabled to activate or deactivate.
Figure 6- 16. System Log Host – Add/Edit window
43
Show All