802.1 Extension Lldp Port Settings - D-Link DES-1228/ME User Manual

Parameter
From/To
Notification State
Admin Status
Port Description
System Name
System Description
System Capabilities
Click Apply to implement changes made.

802.1 Extension LLDP Port Settings

The following window is used to set up 802.1 extension LLDP on individual port(s) on the Switch. To view this window click L2
Features > LLDP > 802.1 Extension LLDP Port Settings.
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Description
Select a port or group of ports using the pull-down menus.
Used to configure each port for sending notification to configured SNMP trap receiver(s).
Enable or disable each port for sending change notification to configured SNMP trap
receiver(s) if an LLDP data change is detected in an advertisement received on the port from
an LLDP neighbor. The definition of change includes new available information, information
timeout, and information update. In addition, the changed type includes any data update
/insert/remove.
Use the drop-down menu to choose: TX_Only, RX_Only, TX_and_RX, or Disabled.
Use the drop-down menu to toggle Port Description between Enabled and Disabled.
Use the drop-down menu to toggle System Name between Enabled and Disabled.
Use the drop-down menu to toggle System Description between Enabled and Disabled.
Use the drop-down menu to toggle System Capabilities between Enabled and Disabled.
105