Service; Raid 4 Protection - Bosch Divar 700 Series Installation And Operation Manual

Divar 700 Series
Figure 6.26 Configuration menu - Storage - Disks - All
All disks
All available disks are shown in the list.
–
–
–
6.10.3

Service

–
–
–
6.10.4

Raid 4 protection

Divar 700 series recorders have a licensed RAID 4 protection feature. When this feature is
active, the recordings are safe, even if one of the hard drives should fail. The RAID feature
requires 4 drives to operate. The net capacity of hard disk space available in RAID mode is 3
times the size of the smallest hard disk in the recorder. So if 4*1 TB is installed, the net
capacity for recordings is 3 TB. If you have 1*500 GB and 3*1 TB hard disks, the net capacity
is 3*500 GB or 1.5 TB.
Bosch Security Systems
Select Internal disks to see a list of installed internal disks and their capacity in
gigabytes.
iSCSI disk locations are also shown. Locations can be added or removed from the list by
clicking Add location or Remove location.
– When Add location is selected, a pop-up window appears; fill in the IP address and
port of the iSCSI array to be added.
Select an individual hard disk from the list and click Properties to view the status of the
selected disk.
Delete recording until... - opens a submenu to delete video older than a specified date.
Delete all recordings - will erase all video on all hard disks in the active disk set
(protected drives will also be erased).
Pause recording... - pauses all recordings for a specified period of time.
Installation and Operation manual
Advanced configuration | en
F.01U.246.471 | v3.4 | 2011.06
97