Panasonic DBS-576 Technical Manual page 294

FF2: Trunk Programming (Analog E&M Tie)
Introduction
DTMF/Dial Pulse Dialing
(all CPCs) - Version 1.0 or higher
Set the E&M tie trunk's signaling type for outbound and inbound dialing.
0
System
Configuration
FF1
System
FF2
Notes:
Trunks
Related Programming:
FF3
Extensions
FF4
Flash Pattern
FF-/Soft Keys
(all CPCs) - Version 1.0 or higher
Set which pattern will be used for flash signals to the CO on this trunk.
(see System Timers to define Flash Patterns #1 and #2)
FF5
Groups
FF6
BSSC: E&M Tie Trunk Position
TRS/ARS
FF7
Applications Notes:
Two different Flash Patterns can be defined in Flash Timers 1 and 2, FF1 1 01 (0001-0002).
FF8
Related Programming:
Maintenance
Flash Timer 1 for Trunk Line (pg. 1-115)
Flash Timer 2 for Trunk Line (pg. 1-116)
Appendix A
Appendix B
Page 2-46
FF2 0 BSSC
BSSC: E&M Tie Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4
FF2 0 BSSC
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4
DBS 576 (USA) issued 05/20/98
02 00 Hold (0 or 1) Hold
0=Dial-pulse, at 10 pps
1=DTMF (default)
02 01 Hold (0 or 1) Hold
FF1 1 01 0001 Hold (1-255) Hold
FF1 1 01 0002 Hold (1-255) Hold
Section 400-Programming
$
, %6 $0$7
$
",9 59
0=Flash Pattern #1 (default)
1=Flash Pattern #2
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400