PCI card support bracket
Some PCI cards have retainers installed to prevent movement during shipping.
Removing a PCI card support bracket
To remove a PCI card support bracket:
1.
Disconnect power from the system
access panel
2.
Remove the two screws that attach the bracket to the chassis (1).
Figure 4-26
3.
Lift the bracket out of the chassis (2).
Installing a PCI card support bracket
To install the PCI card support bracket:
1.
Disconnect power from the system
access panel
80
Chapter 4 Removal and replacement procedures
(Predisassembly procedures on page
(Removing the side access panel on page
Removing a PCI card support bracket
(Predisassembly procedures on page
(Removing the side access panel on page
58) and remove the side
64)
58) and remove the side
64).
ENWW