Canon imagePROGRAF iPF6400S User Manual page 806

Adjustment Types of Color Calibration
• If the paper you are using does not support color calibration, execute color calibration using the paper where the adjust-
ment type is Common calibration, then you can set the calibration adjustment values for the paper you are using.
Note
• The calibration adjustment values are not overwritten for media types where color calibration has been executed once
and dedicated calibration adjustment values have been set.
• Unique calibration
If color calibration is executed on paper categorized as Unique calibration, calibration adjustment values are set
only for the media type that the color calibration was executed on.
• Even if paper categorized as Unique calibration is used, if the media type has yet to execute color calibration even once
and does not have any dedicated calibration adjustment values, the calibration adjustment values are overwritten when
Note
Common calibration is executed.
• Calibration values configured by color calibration using the printer sensor and calibration values configured by color cali-
bration using the optional Spectrophotometer Unit are managed as separate data.
Because of this, the calibration values configured using the Spectrophotometer Unit are not overwritten when Common
calibration is executed using the printer sensor.
Checking the Applied Calibration Values
Depending on the paper type, it may be possible to execute color calibration using both the printer sensor and the
Spectrophotometer Unit and to have two sets of calibration values.
In this case, the calibration values that were set when color calibration was executed the last time are applied when
printing.
The currently applied calibration values can be checked using the Color Calibration Management Console or Control
Panel menu.
How to Check
Check in the Col-
806
or Calibration
Management
Console.
How to Operate
Display the Paper Status dialog box and view
the Type.
(See "Calibration Sheet (Win-
dows).")
P.821
➔
Displayed Content
•
Auto Adjust: Calibration values set using the printer sensor
•
Auto Adjust (High Precision): Calibration values set using the Spec-
trophotometer Unit
iPF6400S
User's Guide