Wireless Security Configuration
Manual Configuration Using the CLI
N O T E :
7-24
Manual Configuration Using the CLI
The following sections show examples of how to use the CLI to view and
configure access point security settings.
Security settings using the CLI can only be made for WLANs in the context of
Radio 1. Security settings for each different WLAN are automatically copied
from Radio 1 to Radio 2. The only setting that can be made specifically in the
context of Radio 2 is to enable or disable the entire WLAN on Radio 2.
CLI: Configuring Security Settings
CLI Commands Used in This Section
Command Syntax
security <no-security | static-wep | dynamic-wep | wpa-psk | wpa-802.1x>
wep-default-key <1| 2| 3| 4>
[no] wep-key ascii
wep-key-length <64|128>
wep-key-<1| 2| 3| 4> <string>
[no] open-system-authentication
[no] shared-key authentication
radius-accounting <primary | secondary> ip <ip> | port <port> | key <key>
radius <primary | secondary>
[no] wpa-allowed
[no] wpa2-allowed
wpa-pre-shared-key <key>
wpa-cipher-tkip
wpa-cipher-aes
rsn-preauthentication
CLI Reference
Page
9-126
9-128
9-129
9-130
9-130
9-131
9-132
9-65
9-67
9-132
9-132
9-133
9-134
9-134
9-136