Switching On/Off Devices - Siemens Gigaset M451 T CI Manual

Connecting the Mains Cable
1. Insert the male connector on the mains cable into the 230V~ 50Hz socket.
2. Connect the mains plug on the set-top box to the mains.
3. Connect all other devices to the mains.

Switching On/Off Devices

Switching On Devices
Your set-top box is equipped with an AV control, i.e. the activation signal is also for-
warded to the SCART TV port when the set-top box is switched on.
Some televisions support this function: If the television is in standby mode and con-
nected to this SCART port, it will be switched on together with the set-top box and auto-
matically selects the required AV channel.
If your television does not support the AV control function: Switch on the television as
usual and choose the AV channel using the remote control for your television.
1. Make sure that the set-top box, all other connected devices and possibly also the an-
tenna are connected to the mains.
2. Switch on your television and any other connected devices (e.g. video recorder, ster-
eo system) as usual.
3. Set the device switch for your set-top box to the position 1. The set-top box is
switched to standby mode.
A
4. Press the button on the remote control to switch on the set-top box. The set-top
box starts and also switches on the television if appropriate.
You will see the programme guide for the last channel selected. The name of the
current channel is shown on the display.
The set-top box first starts the installation wizard when it is started up initially, see
"Running the Installation Wizard" on page 21.
Alternative operation on the set-top box:
y
Use the standby button to switch on the set-top box.
Starting Up the Set-Top Box
19