Panasonic WJ-SX550A Operating Instructions Manual page 117

14-2 Preset Program Menu
As shown below, the Preset Program Menu has three sub
menus:
SET UP PRESET, SET HOME POSI (Position), and PRESET
TEST.
CAM : CameraTitle
*PRESET PROGRAM*
1 SET UP PRESET
2 SET HOME POSI
3 PRESET TEST
PRESET DATA LOADING...
The items on the menu are used to as shown below.
1. SET UP PRESET
Sets up the preset position or preset BLC (Back Light
Compensation) for the camera.
2. SET HOME POSI
Sets up the Home Position for the camera
3. PRESET TEST
Tests the selected all preset positions.
To select item from the Preset Program Menu:
1. Move the cursor to the desired item by moving the
Joystick Controller.
2. Press the Set (SET) Key to execute the selection. The
selected item appears on the monitor.
3. Press the Escape (ESC) Key to return to the original
screen without changing any settings.
14-3 Setting Up Preset Position
After selecting the SET UP PRESET sub menu, a table
titled PRESET NUMBER SET appears on the monitor.
CAM : CameraTitle
*PRESET NUMBER SET*
1# 2#
5# 6#
9# 10#
13# 14#
17 18
21 22
25 26
29 30
3# 4#
7# 8#
11# 12#
15#H 16#
19 20#
23 24
27 28
31 32
-113-
1. Move the cursor to the desired preset number by mov-
ing the Joystick Controller.
2. Press the Set (SET) Key, the Preset Position Setting
table appears on the monitor.
CAM : CameraTitle
POSITION NUMBER : 12
PAN/TILT/ZOOM/FOCUS
SET UP POSITION
3. Set the desired preset position by moving the Joystick
Controller, and adjust the zoom and focus by pressing
the Zoom (ZOOM TELE/WIDE) Control and Focus
(FOCUS NEAR/FAR) Control.
4. When satisfied with the position press the Set (SET)
Key. The Preset BLC (Back Light Compensation)
Setting table appears on the monitor.
5. Move the cursor to the desired position by moving the
Joystick Controller.
6. Press the Increment (INC) Switch or Decrement (DEC)
Switch to select MASK ON or OFF.
7. Repeat the above procedures until the desired MASK
setting is completed.
8. Press the Set (SET) Key to execute the setting. The
screen returns to the PRESET NUMBER SET table.
9. Press the Escape (ESC) Key to return to the Preset
Program Menu.
6