HP BladeSystem c7000 enclosure
The HP BladeSystem c7000 enclosure is ideal for larger data centers with more dynamic data
center environments. It provides 16 device bays and 8 interconnect bays in a 10U rack-mount
configuration.
For more information
Device website:
c7000/
BladeSystem Technical Resources website:
Be sure to read the following documents, shipped with the enclosure:
HP BladeSystem c-Class Solution Overview Setup Poster—Overview of the complete installation
process of an HP BladeSystem c-Class solution.
HP BladeSystem c7000 Enclosure Quick Setup Instructions—Brief physical installation
instructions of the enclosure.
BladeSystem c7000 Enclosure Rack Template—Physical template for helping mount the
enclosure in a rack.
For more detailed information about the enclosure, see the following documents, available on HP
websites:
HP BladeSystem c7000 Enclosure Setup and Installation Guide—Detailed hardware description,
installation, and user information
HP BladeSystem Onboard Administrator User Guide—Information on using Onboard
Administrator.
HP BladeSystem c-Class Enclosure Troubleshooting Guide—Procedures and solutions for
troubleshooting an HP BladeSystem c-Class enclosure, from using the Insight Display to more
complex component-level troubleshooting.
Important tips
The first-generation c7000 enclosure is not supported for use in 6Gb solutions. To determine
your c7000 model, view the Insight Manager LCD panel or Onboard Administrator display.
First-generation c7000 models do not have a generational identifier, while later models do
indicate the generation. For example, the second generation c7000 enclosure is identified
as the c7000 G2.
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/
http://www.hp.com/go/bladesystem/documentation
HP BladeSystem c-Class Enclosures
13