GE SymVeo SV-XP1 User Manual page 28

22 SymVeo IP Camera
User Manual
1.
buttons to move to the AGC option and use the right and
left buttons to move to and between the AGC options
(ON or OFF).
Figure 14. AGC Menu
2.
select OFF to set the system gain manually.
3. With ON or OFF selected and still highlighted, press the
bottom selection button, then use the right and left
buttons to adjust the marker on the scale.
Note:
4. Move to the PREVIOUS PAGE option and press to leave
the current menu.
5. Repeat step 4 to exit the camera setup menu.
At the Camera Setup menu, use the up and down
Select ON to set the maximum automatic gain value and
Note: Observe the results on the monitor screen for the
best setting.