GE SymVeo SV-XP1 User Manual page 2

Copyright Copyright © 2005, GE Security Inc. All rights reserved.
This document may not be copied in whole or in part, or otherwise reproduced
except as specifically permitted under US copyright law, without the prior
written consent from GE.
Document number/revision: 0150-0305C.
Disclaimer The information in this document is subject to change without notice. GE, in
keeping pace with technological advances, is a company of product innovation.
Therefore, it is difficult to ensure that all information provided is entirely accu-
rate and up-to-date. GE accepts no responsibility for inaccuracies or omissions
and specifically disclaims any liabilities, losses, or risks, personal or otherwise,
incurred as a consequence, directly or indirectly, of the use or application of any
of the contents of this document.
This publication may contain examples of screen captures and reports used in
daily operations. Examples may include fictitious names of individuals and
companies. Any similarity to names and addresses of actual businesses or
persons is entirely coincidental.
Trademark Symveo IP Camera product and logo are trademarks of GE Security.
notices Xposure is a trademark of GE Security.
GE and the GE logo are registered trademarks of General Electric.
Other trade names used in this document may be trademarks or registered
trademarks of the manufacturers or vendors of the respective products.
Software GE software supplied with GE products is proprietary and furnished under
license license and can be used or copied only in accordance with the license terms.
agreement
THE ENCLOSED PROGRAM IS FURNISHED SUBJECT TO THE TERMS AND CONDI-
TIONS OF THIS AGREEMENT. RETENTION OF THE PROGRAM FOR MORE THAN 30
DAYS, OPENING OF THE SEALED WRAPPER, IF ANY, SURROUNDING THE
PROGRAM, OR USE OF THE PROGRAM IN ANY MANNER WILL BE CONSIDERED
ACCEPTANCE OF THE AGREEMENT TERMS. IF THESE TERMS ARE NOT ACCEPT-
ABLE, RETURN THE UNUSED PROGRAM AND ANY ACCOMPANYING DOCUMENTA-
TION TO GE FOR A FULL REFUND OF THE LICENSE FEE PAID. (FOR INFORMATION
REGARDING THE RETURN OF PROGRAMS ENCODED OR INCORPORATED WITHIN
EQUIPMENT, CONTACT THE NEAREST GE SALES OFFICE.)
Intended use Use this product only for the purpose for which it was designed; refer to the
data sheet and user documentation. For the latest product information, contact
your GE sales representative or visit us online at www.gesecurity.com.
FCC This equipment has been tested and found to comply with the limits for a
compliance Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful inter-
ference to radio communications.
You are cautioned that any changes or modifications not expressly approved
by the party responsible for compliance could void the user's authority to
operate the equipment.