Account Code Entry
This procedure assumes that
you have enabled the Account
Code option on page 56 of this
manual.
Once enabled, the facsimile
will prompt for an Account
Code prior to dialing the remote
party.
The entered Account Code will
be printed in the Account Code
column on the Activity Journal
(see pages 186).
NOTES:
• "Account Code" tracking is
only possible when using
memory communications
(Memory Transmission,
Polling Receptions, etc.).
• Once entered, an Account
Code is only effective for
that communication pro-
cedure. It will automati-
cally clear upon comple-
tion of the communication,
upon job cancellation, or
upon a communication er-
ror.
140
1
Load the Document
Load the document face down
in the Document Support (see
page 82).
Adjust the resolution and con-
trast if desired (see pages 83
and 84).
JAN-31 09:43 AM 100%
AUTO RECEIVE
2
Enter the Facsimile
Number
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods.
•
One Touch Key Dialing
... See page 89
•
Abbreviated Dialing
... See page 90
•
Alphabet Dialing
... See page 91
•
Keypad Dialing
... See page 92
ENTER ACCOUNT CODE
[
]
3
Enter an Account
Code
Enter the 4-digit Account Code.
ENTER ACCOUNT CODE
[****]
Then press:
NOTE:
It is possible to send a
document without entering
an Account Code. Simply
press
START
or
.
4
Complete the
Procedure
The facsimile starts scanning
the document into memory.
When the document scanning
is complete, the display returns
to the Standby Mode.
SCANNING DOC.
P001
FILE NBR =
244