Table of Contents
Advertisement
Chapter 4: Web-Based Management
Figure 95: LLDP Per Port Configuration
This page includes the following fields:
OBJECT
LLDP Status
LLDP hello time
LLDP hold time
Port Status
138
DESCRIPTION
Enable/Disable LLDP.
You can change LLDP hello time value. The time interval between the
transmission LLDP info packets. Value range is from 5 to 32768. Default
value is 30.
You can change LLDP hold time value. (The hold time * the hello time) is
the TTL time in the LLDP info packets. Value range is from 2 to 10. Default
value is 4.
You can change LLDP port status to Tx_only/Rx_only/Tx_and_Rx/Disable.
Tx_only: LLDP transmit the packet of the port only. Rx_only: LLDP receive
the packet of the port only. Tx_and_Rx: LLDP transmit and receive the
packets of the port. Disable: LLDP do not transmit and receive the
packets of the port.
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
Advertisement
Table of Contents
