GE 82-POE User Manual page 122

Chapter 4: Web-Based Management
OBJECT DESCRIPTION
Src IP Address Set this field if Packet Type is IPv4, else ignore.
Any / IP and Mask
Mask: ***.***.***.***
* is represent a digit from 0-9,
*** is range from 0 to 255
Notice: This is not subnet mask.
Dst IP Address Set this field if Packet Type is IPv4, else ignore.
Any / IP and Mask
Any: Any IP address.
IP : A certain IP address.
Mask: ***.***.***.***
* is represent a digit from 0-9,
*** is range from 0 to 255
IP Fragment Set this field if Packet Type is IPv4, else ignore.
Uncheck / Check
Uncheck: Not check IP fragment field.
Check: Check IP fragment field.
L4 Protocol Set this field if Packet Type is IPv4, else ignore.
Any / ICMP(1) / IGMP(2) / TCP(6) / UDP(17)
Protocol Set this field if Packet Type is IPv4, else ignore.
0-255.
If protocol not find in L4 Protocol field, you can direct assign
number.
TCP Set this field if Packet Type is IPv4, else ignore.
Any / FTP(21) / HTTP(80)
Port Set this field if Packet Type is IPv4, else ignore.
0-65535
If TCP port not find in TCP field, you can direct assign
number.
UDP Set this field if Packet Type is IPv4, else ignore.
Any / DHCP(67) / TFTP(69) / NetBios(137)
118
•
Any: Any IP address.
•
IP : A certain IP address.
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
DEFAULT VALUE
Any
Any
Uncheck
Any
Any
Any