Bosch Security System Owner's Manual page 34

Hide thumbs Also See for Security System:

Table of Contents

VALID AREA1? displays. Press [YES] if you want the passcode to be valid in area 1.

Press [NEXT] if not.

•

Enter the authority level for this passcode in area 1. You may assign an authority

level of 1 to 15. Press [ENT]. Press [NEXT] if you don't want this passcode to have

authority in area 1.

•

VALID AREA 2 ? displays. Press [YES] if you want the passcode to be valid in

area 2. Enter an authority level for this area and press [ENT]. Press [NEXT] if you

don't want the passcode to have any authority in this area. Repeat this procedure

for

The command center briefly displays PASSCODE ADDED and then returns to idle text.

areas 3 to 8.

Table of Contents