Call History - Toshiba IP EDGE User Manual

Station Call Forward
Procedures
Call Forward Examples

Call History

IPedge UG 11/11
You can register a Call Forward function by entering the button sequence as
described or by programming a Programmable Feature Button to perform the
sequence.
To use the Call Forward button sequence:
Follow the instructions in See
•
shown under the "Button Sequence" heading. Some features require
additional input, such as:
•
Dest. Ext. or Telephone No.
can be internal extension numbers or outside telephone numbers.
If the destination is an outside number, enter the access code
used for dialing out (such as 9) + the telephone number +
telephone system accepts destination numbers of up to 32 digits.
• – Enter the number of seconds (08~60) your telephone
Timer
should ring before forwarding the call. (This is the Call Forward-
No Answer timer.)
•
Call Forward Pass Code
can be set up by your System Administrator and will allow one
station to activate the call forward setting for another station.
Users must enter the Call Forward pass code for the station to be
forwarded.
To program call forward button destination using the EMPA.
Login to your EMPA and select Call Forward to turn selections on and off.
Select Home to program the button.
To set your telephone to Call Forward Busy-No Answer to an internal
extension number:
Press your extension button + #6041 + 3000# + 10
•
#6041 = Call Forward Access Code sequence
3000# = Internal Extension Number
10 = Ring time in seconds before Call Forwards
To set another telephone to Call Forward Busy-No Answer to an outside
destination number after a set time:
Press your extension button + #6042 + 1234 + 1111 + # + 9 +1 949
•
5873000 + # + 08
#6042 = Call Forward Busy No Answer Access Code sequence
1234 = Other telephone's extension number
1111 = Call Forward Passcode for other telephone + #
9 = Outside Line Access Code
1 949 5553000 = 1 + Area Code + Telephone Number
# = Must press after entering an outside destination number
08 = Ring time in seconds before Call Forwards
Incoming calls with Caller ID or ANI information can be optionally recorded
into a rolling list for the station where the call is ringing. The call is placed in
the list along with the number, name (if provided), time and date of the call,
TOSHIBA
Feature Operations
"Call Forward Examples"
– Call Forward destination numbers
– A four-digit Call Forward pass code
IPedge
on page 4-43,
# . The
43