Philips Flat TV 42PF9936 User Manual page 13

Features menu )
f
Features f
( AutoLock
Timer
AutoLock I_
Contrast+
DNR
PiP
Block Channel
Lock HD
Change Code
Clear All
Block All
Movie Rating
TV Rating
Block Options I_
Unrated
No rating
Blocking
Timer
This menu Jets you use the TV set as an alarm.
0 Press the MENU button.
O With the cursor, select Features, then Timer.
t_ Time: enter the current time with the digit
buttons.
Use the cursor left/right to select and to toggle
AM or PM.
O Start Time: enter the start time.
StopTime: enter the standby time.
Channel No: enter the number of the channel
for the wake-up alarm.
_[_ Activate: the settings include:
• Once for a single alarm;
• Daily for each day,
• Off to cancel
i_ Display: press the cursor right to select On or
Off, according to if you want to display the
current time on theTV screen or not.
0 Press the (_) button on the remote control to
put the TV set in standby. It will automatically
come on at the time programmed. If you leave
theTV set on, it will just change programs at
the time entered (and will go to standby mode
at the StopTime).
Note: by combining the AutoLock and Timer
functions, you can restrict the period during which
the TV set is used, for example by your children.
J
AutoLock
The AutoLock feature receives and processes data
sent by broadcasters or other program providers
that contain program content advisories.When
programmed by the viewe_, the TV can respond to
the content advisories and block program content
that may be found objectionable.
AutoLock allows parents to block out or"censor"
any channels they think children should not watch.
A channel blocked cannot be viewed until a correct
access code is used to unlock the channel for
viewing.
0
o
o
o
Press the MENU button,
With the cursor,select Features,then
AutoLocl(.
Press the cursor right to enter the AutoLock
menu.
You are asked to enter your Access Code.
• Press 0,7,1,1 on the remote control.
Incorrect will appear on the screen.
• Press 0,7,1,1 on the remote control again.
New Code will appear on the screen.
• Enter a new 4-digit code using the number
buttons. Confirm Code will appear on the
screen,
• Enter your new 4-digit code again.
Confirmed will flash on the screen briefly
and the highlight bar goes back to Block
Channel.
Important: you have forgotten your
Access code
Remember that 0.7.1.1 is the default
AutoLockTMcode. If your access code has
been changed by someone other that you [a
child, for example) or you have forgotten the
code, you can always get in by inputting the
default code.
10