HDMI
(High
Definition
Multimedia
Interface)
connector
AV3
/
HDMI is the leading new standard for Digital
High Definition
video
and audio interconnection.
Eg.with a Digital
Set top box, with
HDMI-equipped
devices like a DVD-R, AV receiven_
Note: The HDMI connector does NOT support DVI devices with analogue
audio.
The HDMI connector
allows
- the followingTV
and monitor
display modes:
EDTV
640/720
x 480p
720 x 576p
HDTV
1920 x1080i
VGA
640 x480
60 Hz
SVGA
800 x 600
60 Hz
XGA
1024x768
60Hz
- uncompressed
HD content
- encrypted
or non encrypted
signals.
Connect
the digital HDMI output
of your HD device
(e.g. DVD playe_. Set Top Box..) to the HDMI
connector
of your TV.
Notes:
Proper working is only guart_nteed with HDMI compliant consumer products.
Digital devices from different rnanufactumrs have the possibility of differing output standards which may cause
difficulties for the television to properly display;
- If the set is cold there may be a small "flicker" when the set is turned on. This is normal, there is nothing wrong
with the set.
To select
connected
devices
;#
_
i__,_
_
_ _ ;i
According
to where
you connected
the accessory
devices,
press
• AV+ followed
by digit 'f
to select
AVI
• AV+ followed
by digit '2' to select
AV2
• AV+ followed
by digit '3' to select
REAR for a device connected
to the rear or to the side (according
to the type of TV you've
purchased),
see p. 6
• AV+ followed
by digit '4' to select
HD-A for a HD-A device
connected
to AV3, see p. 8
• AV+ followed
by digit '4' again to select
HD-D for a HD-D
device
connected
to AV3, see p. 9
• AV+ followed
by digit '5' to select
PC-A for a PC connected
to
AV3, see p. 8
• AV+ followed
bij digit'f
and followed
by P+ to select
CVI.
Note: _4hen in HD or PC mode, first press the TV button to return to TV
mode or to select AV1, AV2 or REAR again.