Server Control Operations - NEC EXPRESS 5800 ES1400 SERIES Online Service Manual

Server Control Operations

Three server control operations are available from the menu or toolbar of the main EMP window,
remote server connection, powering the server on and off, and resetting the server. The server
console mode can also be switched between EMP active and BIOS redirect modes through post-
power-up and reset options.
Connect
When you select [Re]Connect from the Connect menu, the Connect dialog allows you to connect to
a selected server. If the client machine is already connected to a server, initiating connection
generates a warning message. It lets you know that the existing connection will be terminated if
you continue trying to initiate the new connection. You are prompted to enter the EMP password
whenever a connection is attempted.
Options available in the dialog are:
n
Line Selection
connection to the server.
Dial-up
Direct connect (Serial Line)
modem serial cable.
n - you can select or enter a server name from a dropdown edit list box of available
Server
servers. A server must be selected when the line selection is Dial-up.
Connect Dialog
- you can specify whether to use a direct connection or dial-up modem
- connects to a selected server with a modem.
- connects to the selected server directly using a null
Emergency Management Port Console C-9