Toshiba TOSLINE-S20 Instruction Manual page 34

TOSLINE-S20 Active Star Coupler (ASC25) Instruction Manual
(3) Fold the tension member, and insert the collar through the jacket of optical fiber core wire
until the collar went under the cord housing. The collar shall be exposed from the edge of
housing removal by 1 mm or less.
Housing
Tension member
is divided to two
equal portions.
Figure 9.11 Collar insertion
(4) Using the jacket remover (use the hole at 0.5 side of label indication), remove the cover
(semi-transparent) of core wire of the optical fiber.
TOSLINE S20
Collar
Jacket
Housing
Core cover
max. 2 mm
Figure 9.13 Residual length of core cover
33
Collar
Housing
max. 1 mm
Figure 9.12 Protrusion of collar
Clad
6F3B0360
Jacket