Precautions On Handling Optical Fiber And Optical Connector - Toshiba TOSLINE-S20 Instruction Manual

(3) List of optics-related parts
Name
Optical fiber cable
(Standard optical fiber
cable)
Optical fiber cable with
optical connector
(Standard optical fiber
cord)
Aligner (In-line adapter)
9.4

Precautions on handling optical fiber and optical connector

Since optical fibers are finely finished parts and are made of glass, handling of them shall
be done with special care emphasizing the following.
(1) Do not damage and contaminate the edge faces of optical connector. Damage
or attached dust on the edge of optical connector increase the connection loss.
If the edge of optical connector is contaminated, remove the contaminants from
the edge.
Model, Rating
2001H-MMnn/¨¨¨¨
2-C-LAP 2XCCV-HC-20/07
2001H-M-¨¨¨¨ DCV-HC-
20/07
2001H-MM-¨¨¨¨ DCV-HC-
20/07
IAT-4000
Table 9.3
Edge
Figure 9.8 Edge position of F07 Type connector
(Main line cable)
(¨¨ denotes cable total length.)
(nn denotes exposed cord length.)
(Cord with connector on one end)
(¨¨ denotes cord length.)
(Cord with connector on both ends)
(¨¨ denotes cord length.)
(Connection of optical connectors)
Key to prevent insertion error
30
Use
ASC25 Instruction Manual