Brother HL-2600CN Service Manual page 236

4.2.8 Main Motor 2 / BD Gear ASSY 2
1) Remove the connector (1 pc.) from the main motor 2 PCB.
2) Remove the screws ST3X6 (4 pcs.) holding the main motor 2 to the BD gear ASSY 2.
3) Remove the main motor 2 from the BD gear ASSY 2.
4) Remove the screws ST3X6 (3 pcs.) holding the BD gear ASSY 2.
5) Remove the BD Gear ASSY 2.
BD Gear ASSY 2
Main motor 2
Fig.7-34
VII-24