Installing Additional Memory; Introduction; Tools Required - HP D5970A - NetServer - LCII Installation Manual

5 Installing Additional Memory

Introduction

This chapter includes guidelines and instructions for:
Removing and reinstalling a HP NetServer LXr Pro 8000 memory board
for a memory upgrade
Installing DIMMs in the specified configuration s on the memory board
Removing DIMMs and downsizing the memory configuration

Tools Required

These tools are required for removal and installation of accessories:
Torx T-15 driver
An anti-static service kit (3M
includes a static-dissipating work surface, a chassis clip lead, and a wrist
strap.
Figure 5-1. Memory Board and DIMM
8501/8502/8503 or equivalent). This kit
33