Step 5: Continuing With The Rack Installation Process - HP D5970A - NetServer - LCII Installation Manual

Chapter 13
6. Hold the bezel in front of the server. Line it up with the hinge and bezel
latch, and then press it firmly into place, especially at the top-left and
bottom-left corners. You should hear several clicks as the bezel fits into
place on the hinge and latch. See Figure 13-14.
Figure 13-14. Attaching the Bezel to the HP NetServer
Step 5: Continuing with the Rack Installation
Process
After you install the HP NetServer in the rack, refer to the Rack Installation Road
Map to continue with the process of installing and configuring your HP rack
system.
Alternative Rack Mounting
131