Sony HMZ-T2 Reference Manual page 27

Control for HDMI
Power off when
unmounted
Illumination
Language setting
Prolonged viewing
warning
Startup viewer
warning
On: Activates control for HDMI CEC (Consumer Electronic
Control)-compatible equipment connected to the
processor unit using the v/V/b/B buttons on the head
mounted unit.
v button: Starts playback.
V button: Pauses playback.
b button: Jumps to the previous chapter. Hold the
button down for fast-rewind.
B button: Jumps to the next chapter. Hold the button
down for fast-forward.
Off: Deactivates this function. Use the remote control of the
connected equipment to control it.
Note
• If control is not possible with this setting activated, the connected
equipment is not compatible with the system's "Control for HDMI"
function. Control connected equipment directly.
On: Turns the system off automatically 30 minutes after you
take the head mounted unit off.
Off: Deactivates this function.
Tip
• Regardless of this setting, the screens will go off automatically
10 seconds after you remove the head mounted unit.
On: Activates the illumination on the head mounted unit.
Off: Deactivates this function.
Sets the language used for menus and other interface elements.
Notes
• Audio is muted while this setting is configured.
• The volume cannot be adjusted while this setting is configured.
On: Activates automatic display of a warning about whether to
turn the power off after 3 hours of continuous viewing.
Selecting "Yes" on the warning screen will turn the power
off. Selecting "No" will cause the power to be turned off
3 hours later, after 6 hours of continuous viewing.
Off: Deactivates this function.
Notes
• When the warning is displayed after 3 hours of viewing, if no response
is made in 90 seconds, the power will automatically be turned off.
• A warning screen will be displayed at 30 minutes and 5 minutes before
the system will turn itself off.
On: Activates automatic display of a startup warning.
Off: Deactivates this function.
27