Table Destination and Folder
Destination
Japan
U.S.A.
The menu display is also the same as in step 4). Check two points of (A) and (B) on the menu in step 4).
These are different depending on the destination ((A) is same.) The display for every destination is shown
below.
Table Differences of display by destination (Differences are underlined.)
Destination
Japan
U.S.A.
14) Wait for a while. Then, "OK" appears on the PC.
15) Remove the USB cable. At this moment, be careful not to touch the POWER button of gigabeat S. By
removing USB cable, "OK" on the PC disappears.
16) Hold down the Power key to suspend (Power OFF). Plug out the AC adapter.
3.5.
When replacing the LCD and LCD backlight unit
3.5.1. Incorporating them into the LCD frame
Peel off the protective film from the LCD and LCD backlight, then incorporate them into the LCD frame.
Guard against fingerprints and dust.
Folder name
OTTOMAN_SAMPLE_JP
OTTOMAN_SAMPLE_US
(A)
version 0.9.9.10
version 0.9.9.10
Scenario file name
OTTOMAN_SAMPLE_JP.ini
OTTOMAN_SAMPLE_US.ini
(B)
TRANS SAMPLE COMTENTS(JP) Ver.6423A
TRANS SAMPLE COMTENTS (US) Ver.6423A
16