Configure Wpa-Enterprise (Ap Mode) - D-Link AMPLIFI DAP-1525 User Manual

Section 4 - Security

Configure WPA-Enterprise (AP Mode)

It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser
and entering the IP address of the bridge (192.168.0.50). Click on
Setup and then click Wireless Settings on the left side.
2. Next to Security Mode in the Wireless Security Mode section, select
Enable WPA/WPA2 Wireless Security.
3. Select Auto(TKIP/AES), TKIP, or AES from the Cipher Type drop-
down menu. If you have wireless clients that use both types, use
TKIP/AES.
4. Select EAP from the PSK / EAP drop-down menu
5. Enter the IP Address of your RADIUS server in the RADIUS Server IP
Address field.
6. Enter the port you are using with your RADIUS server in the Port
field.
7. Enter the security key in the Shared Secret field.
8. Click Save Settings at the top of the window to save your settings. If you are configuring the access point with a wireless
adapter, you will lose connectivity until you enable WPA on your adapter and enter the same passphrase as you did on the
access point.
D-Link DAP-1525 User Manual 67