Assemble The Pendant In Packing Box - Bosch VG4-161-CC0 Installation Manual

62 en | Installing Roof Parapet and Pipe Mounts
6.
CAUTION!
Be careful not to strip the threads when tightening the Pipe Interface Board retaining screws.
3.8

Assemble the Pendant in Packing Box

The AutoDome Pendant can be assembled before attaching it to the roof or pipe mount. The
Pendant includes a Housing, Camera Module, and Bubble.
1.
2.
NOTICE! The Pendant Housing box is designed to hold the housing in-place during the
assembly of the Pendant.
F.01U.216.010 | 8.0 | 2011.02
Insert the Pipe Interface Board into the down pipe and fasten the three (3) retaining
screws to secure the board to the Dome Cap.
Figure 3.12 Pipe Interface Board to Dome Cap Assembly
1 Interface Board
2 Retaining Screws (3)
3 Pendant Mounting Screws (2)
Open the box containing the Pendant Housing from the top, and remove the two
cardboard inserts from the top of the box.
Remove the plastic bag from the Pendant Housing, and then place it back into its box.
Installation Manual
VG4 Modular Camera Series
Bosch Security Systems, Inc.