Attach The Pendant Arm To The Mounting Plate - Bosch VG4-161-CC0 Installation Manual

VG4 Modular Camera Series
3.
2.8.1

Attach the Pendant Arm to the Mounting Plate

The bottom hinge pin of the Pendant Arm is provided with a Hinge Pin Stop to hold the hinge
open while attaching the arm to the Mounting Plate.
1.
Bosch Security Systems, Inc.
Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts | en
d. Once the Mounting Plate (item 1, below) is attached to the Mast Plate (item 2),
connect the right angle conduit (item 3) to the Mounting Plate through the empty
conduit hole as shown below:
Ensure that the mounting plate is secure.
Compress the bottom hinge pin by pushing the pin lever downward and rotating it
behind the Hinge Pin Stop.
Figure 2.12 Connect Pendant Arm to Mounting Plate
Installation Manual
29
F.01U.216.010 | 8.0 | 2011.02