Checking The Engine-Oil Level - Toro MM-658H-P Operator's Manual

Mortar mixer
Hide thumbs Also See for MM-658H-P:
Table of Contents

Advertisement

Filling the Fuel Tank
Model(s)
68017C and 68021C
68024C
1. Park the machine on a level surface, shut off the engine,
and allow the engine to cool.
2. Clean around the fuel cap and remove it
Figure 30
1. Fuel cap
3. Add unleaded gasoline to the fuel tank, until the level
is at the bottom of the maximum fuel level, as shown
in
Figure
31.
Important: This space in the tank allows fuel to
expand. Do not fill the fuel tank completely full.
Fuel tank capacity
5.3 L (1.40 US gallons)
6.1 L (1.61 US gallons)
(Figure
30).
1
G019799
1. Maximum fuel level
4. Install the fuel cap securely
5. Wipe up any fuel that may have spilled.

Checking the Engine-Oil Level

Service Interval: Before each use or daily
Important: Use 4-cycle engine oil that meets or exceeds
the requirements for API service category SJ, SL, SM,
or higher .
Model(s)
68017C, 68021C, and 68024C
Important: If the oil level in the crankcase is too low
or too high and you run the engine, you may damage
the engine. This type of damage is not covered by the
warranty.
Note: Use SAE 10W-30 for general use. You can use
the other viscosities shown in the chart when the average
temperature in your area is within the indicated range
32).
22
1
Figure 31
(Figure
30).
Crankcase capacity
1.1 L (1.2 US qt)
G020679
(Figure

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mm-858h-pMm-12511h-s68017c68021c68024c

Table of Contents